Seminar Abstract:
Covalently cross-linked polymers, or thermosets, exhibit excellent
mechanical strength, thermal stability, and chemical resistance but are difficult to
recycle because their permanent covalent networks prevent melting and reshaping.
Covalent adaptable networks (CANs) address this limitation by incorporating
dynamic covalent bonds that can rearrange under specific conditions, enabling
reprocessing while retaining the benefits of a cross-linked material. Many systems
require external catalysts, which can introduce undesirable effects such as
increased creep, accelerated aging, and catalyst leaching. The work of Torkleson et
al. (Adv. Funct. Mater . 2025) demonstrates an internally catalyzed approach to
siloxane exchange using nearby amide groups. Small-molecule experiments
confirm exchange-product formation, while a temperature independent rubbery
plateau modulus indicates associative CAN behavior. Varying the alkyl-chain
length tunes network cross-link density, which influences both stress-relaxation
kinetics and reprocessability. Higher cross-link densities produce faster exchange
dynamics and reduce the time and temperature required to successfully reprocess
the materials, consistent with the second-order dependence of associative exchange
on crosslink concentration . Finally, melt extrusion of the highest crosslink density
CAN is demonstrated, yielding a material with a cross-link density comparable to
that of its compression-molded counterpart. Under identical processing conditions,
the next-highest-cross-link-density CAN cannot be extruded, highlighting the
importance of network architecture and exchange kinetics in designing recyclable
thermosets for circular polymer applications.
N. S. Purwanto, T. Wang, X. Liu, L. J. Broadbelt, T. Debsharma, and J. M. Torkelson, “ Covalent Adaptable Networks with Associative Siloxane Exchange Enabled by Amide-Based Internal Catalysis: Designing for Reprocessability and Extrudability by Increasing the Cross-Link Density.” Adv. Funct. Mater. 35, no. 43 (2025): 2507313. https://doi.org/10.1002/adfm.202507313

